Process

Product design department provides product information to the injection mould design department,injection mould designers complete cost analysis in two working days and provide to the R & D manager.

After evaluation, injection mould designers begin to design the plastic injection mould, including 3D drawing correction, 3D parting , mould parts assembly drawing , EDM Drawing Electrode Drawing etc. and organize relevant.

Our mould design department understands the client’s requirement and makes a report with all needed information. Our expert designers give a complete cost analysis report in two working days, and confirm with the client.

After material inspection the next step would be VMC machining. We have high precision VMC Machines. The technician pays attention to the precision of each right angle side, avoiding emptying the center hole and each production base.

Mold assembly is one of the most critical steps of mold making procedure, all the parts machined or purchased need to be put together and required to be work functionality. As we design your plastic.

Mold assembly is one of the most critical steps of mold making procedure, all the parts machined or purchased need to be put together and required to be work functionality. As we design your plastic.

Parts at the quality station are inspected for more detailed specifications like measurements or failure tests. Here our experts check some essential parameters of the mould, and make a report accordingly.

Finished parts undergo one the final inspection in our staging area to ensure consistency across production shifts. Here we check all the things about the mold and give the green signal to the mould for their journey.

Our mould design department understands the client’s requirement and makes a report with all needed information. Our expert designers give a complete cost analysis report in two working days, and confirm with the client.